We are a leading Service Provider of commercial pizza oven, conveyor type dishwasher, flight type dish washer, stand for combi oven with ledges for gn pan tray, dough sheeter machine and fire suppression system from New Delhi, India.
Get Latest Price
Type of Pizza Oven | Single Deck 1 Tray |
Number Of Deck | 1 Deck |
For Baking | Pizza |
Size | Small/Mini |
Operation Type | Automatic |
Power Source | Electric |
Usage/Application | Bakery |
Door Type | Single Door |
Body Material | Stainless Steel |
Maximum Temperature | 200 Degree C |
Get Latest Price
Capacity | 1500 Dishes Per Hour |
Usage/Application | Industrial |
Equipment Type | Industrial Dishwasher |
Product Type | Dishwasher |
Usage | Hotel |
Automation Grade | Fully Automatic |
Get Latest Price
Housing Material | Stainless Steel |
Voltage | 400V |
Frequency | 50Hz |
Material Grade | 304 |
Speed | Triple Speed |
Automation Grade | Manual |
Material | Stainless Steel |
Power | 39.0 KW |
• Made of 304-series stainless steel construction with complete insulation. • Double wall all construction for sound and heat insulation • 2 Tank Machine with Pre-Rinse • Capacity: 3000 Plate / Hr • Electronic controls • Triple Speed • Insulated Boiler • Pre-Rinse, Wash, rinse function • Temperature display panel with thermostat function • Dry run protection • Door safety interlock • Easy to clean • Voltage: 400V/50Hz/ 39.0 Kw |
Get Latest Price
Capacity | 12 tray |
Number Of Deck | 2 Deck |
Operation Type | Automatic |
Size | Small / Mini |
Usage/Application | Commercial |
Door Type | Single Door |
Body Material | Stainless Steel |
Maximum Temperature | 200 Degree C |
• Top in 38X38mmX 16 swg SS square tube. • Corner plate in 16 swg, 304 grade SS sheet • 16 no 12 mm ledges for GN pan on both sides • Upright in 16SWG 38X38mm Square Pipe • SS. bullet feet of 20mm hexagonal bar with minimum height adjustment of 20mm; • 150mm ground clearance • KEC to verify site measurements |
Get Latest Price
Material | Stainless Steel (SS) |
Voltage | 380 V |
Usage/Application | Commercial / Large |
Power Source | Electric |
Phase | 3 |
Power | 0.75 Kw |
Frequency | 50Hz |
• Hard chrome treated sheeting rollers. • Optimum conveyor belt speed, with a differentiation between the entry belt (lower speed) and the exit belt (higher speed). • This way the stretching and tearing of the dough, when it passe through the rollers, is avoided and consequently greater output achieved. • Easy dismantling of the rollers, which are adjustable by means of a lever. • Easy dismantling of the scrapers for maintenence purposes as well as ease in he substitution of the conveyor belts. • Anticorrosive treatment of the protective grills. • 35 mm. space between rollers • Voltage:400V/50Hz / 3 Ph , 0.75 Kw, 3 Phase |
Get Latest Price
Fire Fighting System Type | Fire Suppression Systems |
Packaging Type | Box |
Material | Stainless Steel |
Fire Suppression Type | Fire Extinguisher |
Temperature | 50-90Degree C |
Power | 2.0 Kw |
Frequency | 50Hz |
Phase | 1 |
• Top in 16 swg SS.sheet bent 40mm and 12mm on all sides, sound dampened by approved method • Bain Marie tank construction in 16swg thick SS. sheet all corners coved at 20mm or larger radius ; • Rear splash raised 150mm with 19 mm radius at base. • Rear side of splash to be closed. • 9 No.s of X 1/3 GN PAN (150 mm Deep) to be supplied with the unit • 2 kw immersion type heating elements ; quick acting ball valve for drain off • Rotary swItch of reputed make; • Undershelf in 18swg thick SS. sheet , sides & back in 20swg SS. sheet • 18swg ss.channel of size 12/25x100x25/12mm for reinforcement of undershelf. • Water inlet faucet / socket; overflow socket; digital controller with temperature display • Water level controller • False bottom in 18swg ss sheet; insulation cover in 20swg SS. sheet • Glass wool insulation; 50- 90° C or Digital thermostat • SS bullet feet of 20mm hexagonal bar with minimum height adjustment of 20mm ; • 150mm ground clearance. • All ss AISI 304 grade • Voltage: 230V/50Hz/1Ph, 2.0 Kw |
Get Latest Price
Number Of Decks | Single Deck |
Number Of Deck | 1 Deck |
For Baking | Pizza |
Operation Type | Automatic |
Power Source | Electric |
Size | Large |
• The cook chamber is sealed & built of aluminized plate on its sides, for longer life & a brighter interior. • 3 Decks with stone with steam generator • Steam Hood to be provided with the oven • 3 Deck with Stone • 3 No 600x400 Tray / Per deck • Individual Temperature controller • Oven Door: with easy to substitute & easy to clean double panel glass . • Decks to be mounted on proofer base cabinet with hinged double shutters • Proofer with ledges for trays below • Voltage: 400V/50Hz/3 Ph, 25.0Kw |
Get Latest Price
Equipment Type | Commercial Kitchen Chimney |
Usage/Application | Industrial |
Voltage | 220V |
Frequency | 50Hz |
Fabrication | 18swg |
• Fabrication in 18swg 430 grade s.s. sheet • Equipped with grease extraction baffle filters 430 SS. • Grease drain pan • Channels for fixing of filters • LED lights to be concealed within ss body covered with removable toughened glass • Filter to be designed to fit in any commercial dishwasher for cleaning • 150 mm wide supply air plenum • Plenium with large opening at top for connection of supply air duct • Grill construction of extruded aluminum sections • Voltage: 220V/50 HZ/1PH • KEC to verify site measurements |
₹ 95000 Get Latest Price
Refrigerant | R404A |
Temperature Range | -22 Degree/ -18 Degree C |
Defrost Type | Auto-Defrost |
Weight | 0.59 Kw |
Voltage | 230V |
Frequency | 50Hz |
Product Capacity | 600 Litres |
Phase | Single |
Minimum order quantity: 45 Piece
₹ 116966 Get Latest Price
Color | Grey |
Material | Stainless Steel |
Voltage | 230V |
Frequency | 50Hz |
Phase | 1 |
Temprature | 30 Degree C |
Power | 3.0 Kw |
Minimum order quantity: 45 Piece
• 304 grade stainless steel exterior and interior with glass wool insulation • Built-in handles • Thermostat controlled heating element • 2 Kw load air type heating element to be provided • Temp upto 30° C to 110ËšC EGO • Fitted with circulation fans to ensure even temperature and fast warm-up throughout the cabinet • Capacity: 16 ledges in 18swg s.s. sheet to hold 16 Nos. of 1/1 GN pan • Gastronorm shelving system with anti tilt slides • Comes with on/off switch and teflon wiring • One Lockable self-closing insulated door • Electronic Controller with LCD display with On/Off Switch • Unit shall be furnished with Hi-lo alarm bottom • Voltage: 230V/50Hz/1Ph,3.0 Kw • KEC to verify site measurements |
Get Latest Price
Capacity | 2L |
Usage/Application | Commercial |
Tank Volume | 316 AISI |
Frequency | 50Hz |
Phase | 3 |
Power | 16.5 Kw |
Voltage | 400V |
Material | Stainless Steel |
• All exterior panels in Stainless Steel with Scotch Brite finishing. • One piece pressed 1.5 mm work top in Stainless steel • Tank in 316 AISI stainless steel • Tank seamlessly to be welded into the top of the appliance • Adjustable SS bullet feet • Integrated drip zone • Capacity (approx) : 18-lt electric Fryer with 1 well and 2 half size baskets • Heating elements with thermostatic temperature controller • Unit to be consists of Power switch, thermostat, control lamp, safety temperature thermostat, heating elements • Voltage: 400V/50Hz/3ph,16.5 Kw • Easy to clean |
Get Latest Price
Type Of Freezer | Top Freezer |
Brand | Western |
Door Type | Double |
Number Of Shelves | 2 |
Warranty | 2 Years |
Frequency | 50 Hz |
Usage/Application | Commercial |
Capacity | 850 L |
Get Latest Price
Refrigerant | R134A |
Temperature Range | +1 Degree C to +4Degree C |
Weight | 0.60Kw |
Voltage | 230V |
Material | Stainless Steel |
Frequency | 50HZ |
Phase | Single |
• Top in 18swg SS sheet bent 40mm on all sides • Interior & Exterior in 304 grade SS Sheet • Back Splash to be provided • 60mm in-situ PUF insulation • Forced draft cooling system with door heaters • Three doors with cylindrical lock system • Suitable to accommodate 1/1 GN • Digital temperature controller • 3 pieces of non corrosive wire shelves • Automatic defrost • Refrigerant: R134A • Temp: +1° C to +4° C • Capacity of 460 Ltrs • Designed and engineered to operate up to 43°C ambient • On 150 mm legs • Air cooled chilling unit • CFC and HCFC free • Voltage: 230V/50Hz/1Ph, 0.68 Kw • KEC to verify site measurements |
Get Latest Price
Power | 10.8 Kw |
Temperature | 185 Degree C |
Product Capacity | 7+7 Ltrs |
Voltage | 400V |
Frequency | 50Hz |
Phase | Three |
• All exterior panels in Stainless Steel with Scotch Brite finishing. • One piece pressed 1.5 mm work top in Stainless steel • Tank in 316 AISI stainless steel • Tank seamlessly to be welded into the top of the appliance • Adjustable SS bullet feet • Thermostatic regulation of oil temperature up to a maximum of 185 °C. • Integrated drip zone • Capacity : 7+7-ltrs • Heating elements with thermostatic temperature controller • Unit to be consists of Power switch, thermostat, control lamp, safety temperature thermostat, heating elements • Voltage: 400V/50Hz/3ph, 10.8 Kw • Easy to clean |
₹ 30000 Get Latest Price
Structure | Open Top |
Usage/Application | Kitchen |
Shape | Round |
I Deal In | New Only |
Rust Resistant | Yes |
Is It Portable | Yes |
Minimum order quantity: 25 Piece
• Round shape • Fabricated in 18swg s.s. sheet • Top cover of stainless steel Sheet • 75 Ø mm castors with ss brackets • All ss AISI 304 grade |
Get Latest Price
Capacity | 100 Kg |
Equipment Type | Industrial Dishwasher |
Usage/Application | Industrial |
Size | 25x100x25 |
Material | Stainless Steel |
Country of Origin | Made in India |
• Top in 16swg SS sheet bent 40mm and 12mm on all sides excepting sides with splash back. • Top reinforced by 12/25x100x25/12mm channels of 16 swg SS sheet, top sound dampened by an approved method. • Top recessed by 38mm, • 1 Nos. 150mm Ø x100mm height garbage chute, space for garbage bin. • RHS to be designed for inserting into dishwasher • Rear splash raised 150mm with 19 mm radius at base, rear side of splash to be closed • Side bracing in 38X38mmX 16 swg SS square tube. • Upright in 16SWG 38X38mm Square Pipe • SS bullet feet of 20mm hexagonal bar with minimum height adjustment of 20mm , • 150 mm ground clearance • All ss AISI 304 grade • Sink in 16swg SS sheet, deep drawn sinks will be preferred. • All corners coved at 30mm or large radius. • Front SS apron in 18 swg, 304 grade ss sheet • Sink joint with top to be seamless and with rounded edges. • 38mm dia CP drain waste. • 1 Nos of Lever Operated drain waste Valve • KEC to verify site measurements |
Get Latest Price
Equipment Type | Gas Range |
Capacity | 100 Litre |
Usage/Application | Industrial |
Voltage | 400V |
Phase | 3 |
Frequency | 50Hz |
Power | 18.5 Kw |
• Unit to be made of pressed cooking vessel and double jacket in 316 AISI Stainless steel. • All exterior panels in Stainless Steel with Scotch Brite finishing. • Unit has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps. • Robust burners in stainless steel with flame failure device, protected pilot light and optimized combustion. • The special design of the control knob system against water infiltration • Automatic tilting • Capacity (L): 100 Ltrs • Safety valve & safety thermostat to be provided to avoids overpressure & low water level. • Front-mounted inclined led “TOUCH” control panel with recessed deep drawn casing • To be equipped with discharge tube, Solenoid valve & pressure regulator • To be mounted on 150 mm adjustable leg • Voltage: 400 V/3N ph/50 Hz, 18.5 Kw • Easy to clean |
Get Latest Price
Temperature Range | + 0 to +4 DegreeC |
Phase | Three |
Weight | 2.1Kw |
Size | 100X80X400mm |
voltage | 400 V |
Frequency | 50Hz |
• Die formed 60mm thick (Density : 42Kg /M³) wall, corner, partition, 'T' & ceiling PUF panels in 304 ss finish for 0.60mm thick all interior surfaces as well as exposed exterior surfaces. And pre coated finish for exterior surfaces against the walls. • Wall to wall, wall to floor wall to ceiling cam lock ; coved corner & round edges. • Doors to be hinged or to be sliding as shown in the plans, should have TIG welded corners, heating elements, extruded PVC gaskets, removable sill wipers, 03 hinges, heavy duty latches with interior safety release & 250X375mm heated view ports. • Built in cylindrical lock with self closing door, man inside push button & audio visual alarm ; High temperature audio visual alarm. • Vapour proof room light (400 Lux evenly distributed), shatter proof & factory mounted, pre wired light switches to be weather proof • Wall Trap make : Viega :-5636.1 to be supplied with open-able SS304a box of size 100X80X400mm (WxDxH) • Temperature controller to have remote access & connection with Hotel's BMS (optional). • Inwards ramp if sunken floor not available/as per site condition. • Complete installation including without limitation, enclosure panels. Trim, caulking & sealing. • The condensate drain line to run within panel till its connection with wall trap • Refrigeration systems to be mounted on approved frame . • CFC free refrigerant ; Air cooled chilling unit, slim line evaporator. • 1200 MM High 16 SWG Stainless Steel kick plate to be provided both side of the door • Room Temp. + 0 to +4 °C • Semi hermetic Compressor • Voltage: Bidder to specify: 400 V/ 50Hz / 3 Ph, 2.1 Kw • KEC to verify site measurements |
Get Latest Price
Appliance Type | Chapati Making Machine |
Size/Dimension | 21x21x34 Inch |
Size | 25x100x25 |
Material | Stainless Steel |
Thickness | 20mm |
Grade | AISI Grade |
Get Latest Price
Equipment Type | Gas Range |
Capacity | 100 Kg |
Usage/Application | Restaurant |
Finishing Type | Polished |
Grade | SS202 |
Material | SS |
Country of Origin | Made in India |
Get Latest Price
Material | Stainless Steel |
No. of Shelves | 2 Shelves |
Mount Type | Wall Mounted |
Finish type | Polished |
Color | Silver |
Features | Light Weight |
Country of Origin | Made in India |
• 2 Nos shelves in 18SWG ss sheet • Lower shelf at 1350 mm height and upper shelf at 1650 mm height from finished floor • 25mm ø 16Swg SS pipe uprights welded to the top side of shelves. • Extra uprights to be provided for eiling hung shelf wider than 1500mm. • All SS AISI 304 grade • False ceiling height to be verified at site |
Get Latest Price
Number Of Burner | 2 |
Usage/Application | Commercial |
Type | Commercial Cooking Range |
Material | Stainless Steel |
Size | 25x100x25 |
• Top in 16swg ss sheet bent 40mm and 12mm on all sides excepting sides with splash back. • Front in 18swg SS sheet with recessed design. • Sides / back in 20swg SS sheet ; • Rear splash raised 150mm with 19 mm radius at base. • Rear side of splash to be closed. • Heavy duty removable grates of cast iron or MS bars ; 450X450mm. • Grates to facilitate easy removal of flue and to minimize heating up of cooking range ss. top. • Cutouts for grates to be bent as channels;cutouts for grates to be bent as channels. • Burner brackets of 0.9mm thick ss. sheet. • Slide out drip trays of 18swg S.S. sheet ; frame work, of 38x38x3mm steel angles. • M50 canteen Burners with individual pilot flames. • Shelf in 18 swg SS sheet. • 18 swg SS channel of size 12/25x100x25/12mm for reinforcement of undershelf • Individual needle control valves for each burner and pilot flame . • Upright in 16SWG 38X38mm Square Pipe: • Burner manifold of Ç'class ERW pipe with 3/8" Copper inlet ; s.s. bullet feet of 20mm s.s. round bar. • All ss AISI 304 grade • 100 mm offset at back side for LPG line • KEC to verify site measurements |
Get Latest Price
Material | Stainless Steel |
Color | Silver |
Voltage | 230V |
Frequency | 50Hz |
Phase | Single |
Power | 3.8 Kw |
• Constructed in AISI 304 stainless steel • Vertically adjustable height • Temperature controller • Radiating heating elements • Double walled appliance body. • Removable chromed steel cooking grid & drip tray • Wall mounting kit to be supplied with the machine • Voltage: 230V/50Hz/1Ph, 3.8 Kw • KEC to Verify site measurements |
Get Latest Price
Rotation | Automatic |
Material | Stainless Steel |
Power Source | Gas |
Loading Capacity | 20KG |
Useful Height | 655MM |
No. Of Burner | 3 |
• Stainless steel made. • 3 burners in vertical position with a useful height of up to 655mm. • Each burner can be adjusted independently. • Total safety control due to the thermomagnetic valves, one for each burner. • Special high temperature resistant protective grid. • Top motor positioning avoids fat drips. • Loading capacity: 20 Kg • Useful height: 655 mm. |
Get Latest Price
Capacity | 150 L |
Type | Gas Tandoor |
Top Material | Porcelain Clay |
Frame Material | Stainless Steel |
Shape | Square |
Material | Stainless Steel |
Mount Type | Table Mount |
Fuel Type | Gas |
Voltage | 230V |
Frequency | 50Hz |
• Exterior in AISI 304 grade, 18swg SS. sheet • Clay shell with glass wool insulated top. • Steel ring at mouth • Rear splash raised 150mm with 19 mm radius at base. • Rear side of splash to be closed. • Two handles to facilitate the movement • 4 nos. 100x50mm costars with ss brackets, two with brakes • Front open-able mouth • All ss AISI 304 grade • KEC to verify site measurements |
AMAN SHARMA
Uv-Turnkey Pro Private Limited
Second Floor, H.No.28, Block -R Chanakya Palace Part-2, Uttam Nagar, 40 Feet Road
New Delhi - 110059, Delhi, India